Hi All,
I have two DFS servers and set both servers drives to VSS.
HQ DFS server got 10 Target folders except one target all are set to first among all the target . So Project folder is in DR DFS and set as Primary.
My Question if HQ DFS goes down can users access the shadow copies?
If HQ user want to restore project file , what will happen?
Can VSS set to replicate ?
or what is the best way to set this up?
As
I'm trying to assign permissions to a folder that contains multiple sub-folders and files using icacls.
My syntax for assigning a group to a folder:
icacls Z:\TestFolder /grant:r Management_SG:(OI)(CI)F /C
This seems to work. But, when I dig in to a 3rd or 4th sub-directories, I noticed that "Management_SG" does not have permissions to a folder(s) and/or to a file(s)
When I use:
icacls Z:\TestFolder\TestSubFolder /q /c /t /reset
Again, it seems to inherit the permissions from "Z:\TestFolder". But, when I dig in to multiple sub-directories, some of the folders or files does not inherit the permissions. Is there a way to assign permissions and force it to inherit recursively?
I do notice that when I try to assign folder permissions, from Windows Explorer, in the advance properties tab, I would get an error "Error Applying Security. An error occurred while applying security information to: "folder path" Access is denied".
Why would i get that when I have local administrative rights. I've even tried running the Windows Explorer in Admin mode.
Can you please assist.
I have 3 DFSR members (1 primary, 1 backup and 1 remote site). The backup and remote site members have apparently stopped replicating. On the backup member, the DFSRs.exe process is constantly running at >99%, and its generating about 80MB of log files a minute. Scrolling through some of them, seems the majority of the log entries are of this type:
20160608 10:12:40.400 4172 JRWP 763 JournalWrapTask::MarkTopDown LDB Updating ID Record
Also noticed when I run a DFSR Health Report, on the backup member it doesn't list the disk volume where the replicated data resides:
I'm able to browse through the contents of the replicated data on the D: volume, so I know it's there.
In the logs for the remote site member, I see the same "JournalWrapTask::MarkTopDown LDB Updating ID Record" entries, and I also see a lot of:
Meet::CheckInSync -> WAIT Related record is under journal wrap recovery.
Do these log entries mean anything to anyone? Any ideas how I can troubleshoot further?
Thanks,
Shaun
Shaun
Leo
Hello,
We have been experiencing for the last 2 weeks a problem with our folder within the DFS-Namespace. Permissions on "Folder" not target, are being reset and only administrators have permissions.
Namespace server having the issue is a DC Running on Windows Server 2012 R2.
Other namespace server are running Server 2008 and Windows Server 2012 R2 and not having issues, they are also DC themselves.
Thank you,
Marc-Andre
Hello
I've got an windows 2012 r2 as a file server, it worked fine with windows client but not with lunix-based client
I first discovered this problem on an Android phone:http://social.technet.microsoft.com/Forums/en-US/b3a8a7f9-f4b7-4b9f-b586-2ec87fc14d71/cant-access-shared-folders-on-win-2012-r2-with-android-phone?forum=winserverPN
then I did some test on a newly installed lunix OS on a VM today, I found that my server do not response SMB Negotiate Protocol Request from my phone or the testing OS at all.
when I try smbclient -L ServerIP, I get
read_socket_with_timeout: timeout read. read error = Connection reset by peer.
Receiving SMB: Server stopped responding
protocol negotiation failed
the wireshark capture are like this:
3522.704658192.168.1.20192.168.1.10SMB260Negotiate Protocol Request
3622.704745
192.168.1.10192.168.1.20TCP54
microsoft-ds → 41733 [RST, ACK] Seq=1 Ack=195 Win=0 Len=0
3723.090116
192.168.1.20192.168.1.10TCP74
41734 → microsoft-ds [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=8758786 TSecr=0 WS=16
3823.090237
192.168.1.10192.168.1.20TCP74
microsoft-ds → 41734 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=5473099 TSecr=8758786
3923.090382
192.168.1.20192.168.1.10TCP66
41734 → microsoft-ds [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=8758787 TSecr=5473099
I don'tknow what's causing this problem ,is there anyone could help me?
InterLinked CEO
Hi.
We have a 2-node WS2012 cluster that has a file server role with couple shares configured.
We're however constantly getting spammed by the following errors in the eventlog:
1) event 1002, source: SmbServer, message: "RKF failure - SRV2 failed to get acknowledgement from Resume Key filter for persistent handle request."
2) SCOM has an alert opened with this description: "SMB client failed to resume Continuously Available (CA) handle as Resume Key Filter is not acknowledging the handle." Per the alert knowledge, we've inspected ResumeKeyFilter eventlog, but it contains only informational message and warnings and none of those are from the time the alert was created.
Hi guys,
I just switched to use the Robocopy to backup the data between 2 servers via network. During the testing, I found that the SKIPPED numbers in Summary are not tally as below
Total Copied Skipped Mismatch FAILED ExtrasFollowing are the options used at the script Options : *.* /S /E /DCOPY:T /COPY:DAT /PURGE /R:2 /W:30
Could you please help to check and guide me how to fix the number and make it tally.
Cheers
Nicky
Hi Experts,
Just want to find a tool or any script to run on windows fileserver which hosts more than 30 share folders copied from legacy server 2003. Is there a tool which can produce a log of accessed share folders for lets say 3 months time and find the share folders not accessed for months may be years so that can be deleted safely. Tried some tools found on this website https://www.raymond.cc/blog/track-who-modified-or-deleted-files-in-your-shared-folder/ but all of them is kinda shows current share accessed by users also tried sysinternal tools no luck.I know I can see sessions on computer management but its also not helping me as I want to go back couple of months. Checked the audit on GPO but we only do failure audit on object access. Help!!!
bis
Hi guys,
I am having difficulties in deleting files on my shared folder. I get an error message that says the " the file cannot be deleted because the file names or path is too long". I have googled and googled and even giggled but to no avail.
I understand that i am getting this error because the file names are too long but what i want to know is how i can
change files in folders to use shortnames.
Thank you in advance.
Kassoka
Hi all,
I have a WD Sentinel, with Windows 2008 Storage Server. I have set up web Access, but it is not too much opperative because you must download files you want to work with and upload after use it.
It is possible to map this shared folders without setting up a VPN???
Thanks a lot
I just cant figure this out...
We have a new Server2012r2.
Default installation: simply added to the network. In Explorer - Network i see all other computers. And all other computers can see Ser2012. A few folders have been shared with Everyone, which is great, and works fine.
(i should add that i have added the role File & Storage Services)
i want to create a folder DataDav just for user Dav (on a Win7) to see and use. But i cant. I've tried everything i can think of, but i just cant get this working.
Please explain.
I did try creating *another* user on the server and giving perms to the folder - but that means Dav has to log in twice. Once to his pc, once to this folder. We want *one* login, but i dont understand how to get Dav known to the server. (under Share-Permissions only Ser2012 shows in Locations)
Hello All:
We're working with Window Server 2012R2 and FCI. I am able to apply FCI classification rules and remove them with no issues. However, how do we remove the FCI property once it's been applied? I know this can be done manually file by file but that's not going to happen. What am I missing? Thoughts?
JC
I've noticed this with Server 2008r2 Standard and Server 2012 Standard.
Steps to reproduce:
- Create folder path on non-system drive (D:) - D:\Folder1\SubFolder2
- Change permission on SubFolder2 (add domain users as an explicit permission - say, read only)
- Shadow Copy snapshot the volume
- Delete SubFolder2
Test1 - I restore Folder1 (using "Restore", not "Copy" or "Open") and I see SubFolder2 is back, but the explicit permissions have NOT been restored. The permissions are inheriting from Folder1.
Test2 - Instead of restoring Folder1 I re-create SubFolder2 and restore SubFolder2 - same results - permissions are not restored, but are inheriting from Folder1.
Now - I can see the explicitly-set permissions if I open the previous version and look at the properties of SubFolder2 - So they DO appear to be part of the snapshot.
How do I get a restore to work WITH permissions?
Thanks
-Andrew
Hi All,
In Active Directory I have configured the users profile to point their H:\ drive to the namespace \\domain\homefolders\users\Arunj also enable the ABE on Users share.
When users are logon to the domain, H: drive will map correctly and no issues. But laptop users got the following issue.
When they disconnect from the network H: drive disappeared from the Computer. Even when they connect back to the network or wireless, H drive not map. also over the VPN have to map manually.
Look like %HOMEPATH% and %HOMESHARE% variables are not resolved correctly via the DFS.
So I created new GPP setting as follows:
User Configuration/Preferences/Windows Settings/Drive Maps
But this didn't work either.
I think we have to set this via logon script and set topersistence.
So how do i resolve this issue?
As
Hi All,
I have two DFS servers and set both servers drives to VSS.
HQ DFS server got 10 Target folders except one target all are set to first among all the target . So Project folder is in DR DFS and set as Primary.
My Question if HQ DFS goes down can users access the shadow copies?
If HQ user want to restore project file , what will happen?
Can VSS set to replicate ?
or what is the best way to set this up?
As
Hi All,
I have two DFS Servers one in HQ and one in DR. i got 5 sites with DC's. I want all users are connect to one share folder ( Project) in DR Server.
I have set following but still some users ( Only 2-3) are connecting to read only mode in HQ server?
1. Under \\domai.local\dfs\project -Folder Target set the referral order
HQ: Last among all Target
DR: First among all target
2. Namespace Target properties - No changes
3. Under Replication
HQ: Read only
DR: Read/write
make DR as primary member
Do i have to set Namespace Target referrals?
As